Most of the ground foundations now are concrete, and the exposed concrete ground is not beautiful, and will be damaged to varying degrees after a period of use. In order to increase its service life, people put a coat on its exterior, but this kind of coat with a thickness of several millimeters can only increase the short lifespan, and the maintenance and maintenance in the later period will increase the cost, which is not an ideal ground for the business.

Concrete polishing technology, as a new technology, can perfectly solve these problems. It does not apply a layer of coating on the concrete surface to protect the ground, but through the reaction between the concrete silicon crystal hardener and the cement to improve the performance of the concrete and let the problem of dust and sand breakage of the ground surface no longer occurs.

The principle of concrete polishing technology is through the reaction between the silicon component in the concrete silicon hardener and the free calcium ions in the concrete, so that the calcium ions in the concrete become firm, increase the hardness and wear resistance of the concrete, and make the hardness of the concrete reach molar. 8, because the concrete silica hardener will completely penetrate into the cement, so it will not increase the thickness of the concrete itself. It can live the same life as the building, so you don't have to worry about post-maintenance issues.

TransGrind Diamond Tools for Concrete Polishing, click the picture for details.

The following is a detailed introduction to the construction process of polished concrete:

1. First, use 60# metal grinding discs to perform initial grinding on the concrete floor that has passed the curing period (both old and new floors can be used), and remove the laitance layer. (If the ground strength is not good, you can use silicon hardener to increase the hardness before grinding)

2. Sprinkle the roller-coated concrete silicon hardener on the ground that has been ground for the first time, and push it evenly. Improve ground strength.

3. After using the concrete silicon hardener for 4 hours, select 50#/150#/300#/500# diamond resin grinding discs for fine grinding.

4. Sprinkle and roll the concrete silicon hardener again to make the ground stronger and wear-resistant.

5. After the concrete silicon crystal hardener is slightly dry, use a high-speed polishing machine with a diamond polishing pad to polish it.

TransGrind supply different kinds of diamond tools for concrete floor grinding and concrete floor polishing, as well as stone polishing. We have supplied many different kinds of diamond tools for many customers, such as Scanmaskin tools, Lavina tools, Klindex tools, Husqvarna tools, HTC tools etc. Welcome to know more about our products by clicking below picture to get into our official web if you are interested.