11

2021.01

The exposure or protrusion height of diamond on the cutting surface of the sawing tool will affect the cutting depth of each particle, that is, the material removal rate of the cutting tool. The use of diamonds with larger particle size will have a faster material cutting rate. Generally coarse particles are used for cutting soft materials, while smaller particle sizes are used for cutting hard ma...

08

2021.01

The polishing head of polishing material is often used in electric grinders, crane grinders, electric drills, etc. It is a small-scale grinding tool with a handle for polishing materials. Polishing material grinding head is mainly divided into: ceramic polishing grinding head, rubber polishing grinding head, diamond polishing grinding head, emery cloth polishing grinding head and so on. 1. Ceramic...

04

2021.01

Idling: Especially when the new base is used for the first time, it needs to be idling for about 30 minutes. In the summer high temperature season, it needs to be idling with water. The purpose is to further eliminate the influence of the welding head on the base and enhance the saw blade to maintain its inherent quality under high-speed rotation memory. The blocks should not be less than 0.5m3 an...

02

2020.12

After receiving the abrasive tool, carefully check whether there are cracks and other damages, and carefully check whether the relevant trademark signs on the surface of the diamond tools are correct, clear and complete. Grinding tools should be handled with care to prevent vibration and collision, and rolling on the ground is prohibited. Abrasive tools should be protected from moisture and freezi...