How can we help you
The sintering of synthetic diamond tool materials by the EDM process has more outstanding characteristics. With the increase in temperature and holding time, the strength loss and brittleness tendency of synthetic diamond is increasing. In order to retain more of the strength characteristics of synthetic diamond, the sintering temperature and the holding time should be shortened as much as possibl...
In recent years, domestic investment in diamond tools is far inferior to diamonds, and the difference in currency investment is more than an order of magnitude. However, diamond tools are still developing at a faster rate than diamonds in recent years. A number of enterprises with new models, good benefits, and higher technological content have spontaneously emerged. Some of these enterprises have...
Marble grinding block polishing is the previous process of stone care crystal surface treatment or the last process of stone smooth processing. It is one of the most important processes for stone care today. It is different from the traditional marble cleaning, waxing and polishing of cleaning companies. The difference between the two is: Essential difference 1. Marble grinding block polishing cry...
Hard diamond polishing abrasive tools are used when processing soft materials, and soft diamond abrasive tools are used on the contrary, but soft abrasive tools are also used when grinding extremely soft and tough materials. When grinding, the contact area between the workpiece and the polishing tool is large, so the hardness of the polishing pad should be lower. Form grinding, in order to ensure ...
Most of the ground foundations now are concrete, and the exposed concrete ground is not beautiful, and will be damaged to varying degrees after a period of use. In order to increase its service life, people put a coat on its exterior, but this kind of coat with a thickness of several millimeters can only increase the short lifespan, and the maintenance and maintenance in the later period will incr...
Does the epoxy floor need to be ground during the construction process? In the process of floor construction, the ground will always be uneven, which will affect the overall construction effect after the floor is completed. Use less paint and enhance the adhesion of the ground, and the effect after construction is more flat and beautiful. 1. Before the construction of epoxy floor paint, the base l...
There are many things that need to be paid attention to in the construction process of the floor grinder. A little carelessness may cause irreparable ground damage. It needs to be re-ground for construction, which is not only troublesome, but also time-consuming, making the construction period tight, and even unable to complete the work on time. The following are some bad habits that will appear i...
After the floor or countertop of the home is decorated with terrazzo, the surface of the terrazzo has an old state for a long time, and it does not look like new. At this time, it needs to be refurbished, but how to refurbish the terrazzo? How to refurbish terrazzo 1. The old terrazzo must be cleaned of stains before terrazzo mirror treatment can be performed. Terrazzo refurbishment machine grinds...