08

2021.03

Choosing the proper floor grinding and polishing machine is critical for your bottom line, therefore a good understanding of the different options is necessary. Grinding machines are used to prepare, level, polish, and remove glues and coatings on concrete surfaces. They are often called diamond grinders or diamond polishers because they use diamond abrasives to process the floor. There are two ma...

05

2021.03

Understanding how diamond tools work is necessary for anyone who wants to be successful in this industry. Diamonds are not all the same. The two terms most often used when speaking of diamond tools are diamond grit and bond. Most diamond tools are made of synthetic diamond powder, measured in microns and called grit, and a bonding material, usually metal or resin, or a combination of bonding mater...

01

2021.03

Technology has created concrete coatings that are meant to last. This makes removal time-consuming and difficult, but not impossible. There are several techniques you can choose from to take off a coat of sealant, paint or epoxy from a concrete surface. There are two basic methods for removing concrete coatings: mechanical and chemical. Mechanical methods include grinding, sandblasting and sanding...

26

2021.02

Improve the bonding strength between abrasive and abrasive bond and the coating acts as a bonding bridge between them. Slow down the thermal shock. The metal coating conducts heat more slowly than the superhard abrasive. The grinding heat is buffered by the coating and then transferred to the resin bond in contact with the abrasive particles, so as to prevent the resin bond from burning out due to...

23

2021.02

Diamond is made of graphite as raw material, some metals or alloys as catalyst, under high temperature (1000~2000℃) and high pressure (557~608Mpa), the graphite structure is transformed into diamond structure. Diamond is the hardest substance known, with high compressive strength, good thermal conductivity, chemical stability, wear resistance, and strong cutting ability. Diamond can be divided int...

21

2021.02

The bond is one of the most important (but often overlooked) components of diamond tooling. The tools are often categorized into a select few groupings like hard, medium or soft metal-bond, hybrid/ semimetal bond, and wet or dry resin bond. In general, there is not a good appreciation for the multitude of variations of the bond in each of those overly simplified category classifications. The key t...

09

2021.02

The concrete polishing industry continues to improve rapidly. Tooling and liquids are being introduced regularly to provide the best solution at the lowest cost while reducing waste and the impact on the environment. Polishing concrete is an effective way to strengthen your floors while adding an attractive shine. This can be achieved using two different methods - dry or wet. T...

05

2021.02

Most individual think of concrete as a obvious choice for a surface suitable only for driveways, garages, and sidewalks. Surprising enough there are many different styles and benefits of concrete flooring. As you may know, plain concrete slabs have served as the flooring material for basements, garages, patios, and utility areas for many years, but concrete is now also a viable material in modern ...